Sheet-metal work · Gothenburg & western Sweden

Sheet-metal work in Gothenburg – gutters, downpipes and flashings

The right sheet-metal work leads water away from the roof and facade and prevents moisture and rot damage. We replace, fabricate and install gutters, downpipes, bargeboards, chimney flashings and roof drainage in steel, zinc, aluminium and copper – with made-to-measure sheet metal and a fixed price.

  • Gutters, downpipes, flashings and roof drainage
  • Steel, zinc, aluminium and copper
  • Made-to-measure sheet metal for a perfect fit
  • Fixed price and ROT deduction
Request a free quote 031-96 88 88
Gutter and white downpipe installed against a white house facade
Fixed price · ROT deduction
Fixed pricePrice guarantee in every quote
ROT deductionWe handle the application
Free inspectionReply within 24 hours
Local tradespeopleGothenburg & western Sweden
F-tax approved (F-skatt)
No tax deductions or employer contributions for you as a customer
Insured company
Business insurance for a safe, secure job
VAT registered
Registered with the Swedish Tax Agency for VAT

Other sheet-metal work in Gothenburg

The sheet-metal details determine how long the house lasts

A roof is only as watertight as its weakest detail. Gutters, downpipes, bargeboards, apron flashings, chimney flashing and junction flashings do the invisible work of leading away rain and meltwater. When they rust, warp or come loose, the water runs where it should not – and the costs of a moisture-damaged facade, rotten eaves and a damaged foundation are considerably higher than for new sheet-metal work.

We fabricate and install sheet-metal details in steel, zinc, aluminium and copper. Because we can cut the sheet metal to measure on site, the fit is exact, even on older houses with crooked or unusual corners. We help you choose a material and colour that match both the house and your budget.

You receive a written fixed price after the inspection, and the labour cost is normally eligible for the ROT deduction.

Materials
Steel, zinc, aluminium, copper
Service life
25–80 years depending on material
Price
Fixed price after inspection
ROT deduction
30% on the labour cost
Close-up of a galvanised sheet-metal gutter along the eaves
A working gutter leads rainwater away from the roof and facade.

When should the sheet metal be replaced?

Signs that gutters and sheet-metal details need attention

Sheet-metal details are often visible from a distance when something is wrong. Look out for:

  • Rust, holes or leaking joints in gutters and downpipes
  • Gutters that hang crooked, have come loose from their brackets or collect water
  • Water streaks, damp patches or algae growth on the facade below the eaves
  • Rotten or discoloured eaves, bargeboard or cladding next to the sheet metal
  • Ice and snow problems at the eaves in winter – often a sign of poor drainage
  • Loose or warped flashings around the chimney, roof windows and dormers

We check the sheet-metal details in connection with every roof renovation and roof replacement.

Older gutter along a clay-tile roof with visible wear
Rusty or warped gutters should be replaced before they damage the eaves and facade.

Why M2 Bygg Team

Sheet-metal work that withstands West Swedish weather

Made-to-measure sheet metal

We can fabricate flashings and details on site to exact measurements – a perfect fit even on older houses with unusual angles.

The right material for your house

Steel is affordable, zinc and aluminium are light and corrosion-resistant, copper is premium. We help you choose according to house and budget.

The whole drainage system

We look at the whole picture – gutters, downpipes, connection to storm drains and fall – so that the water really is led away from the house.

Correct installation and fixing

Correct fall, the right number of gutter brackets and sealed joints make the difference between a gutter that lasts for decades and one that leaks within a year.

Fixed price and ROT deduction

You receive a written fixed price including materials and installation, and we deduct the ROT deduction directly on the invoice.

A neat and tidy result

Clean cuts, matching colours and scrap removed – the sheet-metal work should look as good as it works.

How it works

How the sheet-metal work proceeds

  1. 1

    Inspection and measuring

    We look at the existing gutters, downpipes and flashings, measure lengths and fall, and assess the substrate and fixings.

  2. 2

    Choice of material and quote

    You choose material and colour together with us and receive a written fixed price including installation within 24 hours.

  3. 3

    Removal of old sheet metal

    Existing gutters and flashings are taken down, and the eaves and fixings beneath are checked and repaired where needed.

  4. 4

    Fabrication and installation

    New sheet metal is fabricated or ordered, installed with the correct fall and fixing, and joints are sealed.

  5. 5

    Connection to drains

    Downpipes are connected to the storm drain or a spout so that water is led away from the foundation.

  6. 6

    Final check

    We water-test where needed, check that everything is secure and clean up after ourselves.

Materials

Sheet-metal materials – how they differ

All sheet-metal materials work – but they differ in price, service life and appearance.

Steel sheet (coated)

The most common choice: affordable and strong, with a colour-coated finish in many shades. Damage to the coating must be repaired to avoid rust.

25–40 years · Affordable

Zinc sheet

A naturally corrosion-protected metal that develops a grey patina over time. A very long service life and a classic look on older houses.

60–80 years · Maintenance-free

Aluminium

Light, rustproof and easy to work. Works well where weight matters and in coastal environments with salty air.

30–50 years · Light

Copper

A premium material with a unique character – it turns green with the years. Used on churches, older houses and architect-designed buildings.

Very long · Premium

Read more: Roof renovation · Roof replacement · Sheet-metal roofs

Price & ROT deduction

How much does sheet-metal work cost?

The price depends on the material, the length and how complicated the house is to access. As a guide, gutters cost 800–3,000 kr per linear metre and a downpipe for a normal house height costs 3,500–6,000 kr, depending on material, dimensions and height. We always give a fixed price after inspection.

What affects the price

  • Material chosen – steel, zinc, aluminium or copper
  • Total length of gutter and number of downpipes
  • Height of the house and the need for scaffolding or a boom lift
  • Whether the existing system is to be removed or supplemented
  • Complex details: corners, chimney, dormers and junctions

Guide prices incl. materials and installation

OptionApproximate price
Gutters800–3 000 kr/running metre
Downpipes, typical house height3 500–6 000 kr/each
Sheet-metal flashing at the eaves600–1 200 kr/running metre

Prices are indicative budget levels according to our price guide. Materials, installation and any removal are specified in the quote.

ROT deduction

The labour cost for replacing and repairing sheet-metal details is normally eligible for the ROT deduction: a 30 % tax reduction on the labour (max. 50,000 kr per person per year). We deduct it directly on the invoice.

Request a fixed price See the full price guide

The area we work in

Other sheet-metal work in Gothenburg and West Sweden

We carry out sheet-metal work in Gothenburg, on Hisingen and across West Sweden – from Kungsbacka and Mölndal to Kungälv, Lerum, Alingsås and Trollhättan. Our sheet-metal workers fabricate and install on site, which gives a short lead time even for made-to-measure details.

Frequently asked questions

Questions about other sheet-metal work

As a guide, gutters cost 800–3,000 kr per linear metre and downpipes for a normal house height 3,500–6,000 kr each, depending on material, dimensions, height and access. You always receive a fixed price after inspection.
It depends on the house and budget. Coated steel sheet is affordable and the most common, zinc has the longest service life and is maintenance-free, aluminium is light and rustproof, and copper is a premium choice. We go through the options at the inspection.
At least once a year, preferably in autumn once the leaves have fallen. If you have trees near the house, it may be needed more often. We can clean gutters and downpipes in connection with other roof work.
Yes. We can fabricate bargeboards, flashings, chimney flashing and other details to exact measurements, which gives a perfect fit even on older houses.
If the damage is limited to individual joints or brackets, a repair is enough. If the gutter is rusted through, warped or has the wrong fall, it is usually better to replace the whole run. We give honest advice.
Yes, the labour cost for replacing and repairing gutters and sheet-metal details is normally eligible for the ROT deduction and gives a 30 % tax reduction (max. 50,000 kr per person per year).

More services

You may also need these

Roof renovation in Gothenburg

Roof renovation

Partiell reparation av läckor, skadade pannor och undertak – ofta ett billigare alternativ till fullt takbyte.

Läs mer
Roof replacement in Gothenburg

Roof replacement

Komplett takbyte med tegel, betong eller plåt – fast pris efter kostnadsfri besiktning.

Läs mer
Roof washing in Gothenburg

Roof washing

Högtryckstvätt och mossbehandling som tar bort alger och mossa – ett kostnadseffektivt sätt att skydda taket.

Läs mer
Facade renovation in Gothenburg

Facade renovation

Lagning av sprickor och skador på alla fasadtyper – återställer utseende och skyddar konstruktionen.

Read more

See all our services · Price guide · Gallery of previous projects

Get started today

Ready for a fixed price?

Free inspection and written quote within 24 hours. No obligation.

031-96 88 88 Request a free quote
Call Get a fixed price